Cross Stitched Leather Cuff Tutorial

Cross Stitched Leather Cuff Tutorial from Hugs are Fun

Please note: This post contains affiliate links as indicated by an asterisk.

Forever ago I was accepted as a Darby Smart designer. I got a bunch of awesome supplies to play with and when I saw the vegan leather cuff, I knew it needed to be cross stitched on.

This project is super easy and quick and only takes a couple supplies. You can get them directly from Darby Smart here. You need:

All-Purpose Rotary Punch” target=”_blank”>*Rotary punch
Embroidery floss and needle
Cuff bracelet (This can be any material or thickness)
Pencil and ruler

Cross Stitched Leather Cuff Tutorial from Hugs are Fun

First start by making a grid for the holes. I measured 1/2″ from each side and drew a line. Then the lines between are 1/4″ Then draw the horizontal lines every 1/4″ I started at the center and worked out, drawing the lines lightly with pencil so I could erase them after.

Cross Stitched Leather Cuff Tutorial from Hugs are Fun

Punch holes using the smallest hole size on the rotary punch. Use the above photo for reference for how many holes you will need.

Cross Stitched Leather Cuff Tutorial from Hugs are Fun

I used all six strands of the embroidery floss since the Xs are so big, but feel free to tailor it to your personal preference.

And that’s it, super easy and quick! It’d make a great Christmas gift or stitch up a bunch for yourself!

Leave a Reply