How To Assemble a Laser Cut Hexie Necklace

How To Assemble a Laser Cut Hexie Necklace from Hugs are Fun

A few weeks ago I had an idea for a necklace with tiny, fabric hexagons. I had made some English paper pieced .25″ hexagons and they were absolutely adorable, but so light that I didn’t think they would work as a necklace. I turned to Jennifer from 52 Lasers with a laser cutting request and she produced an awesome pendant. Then when she dropped off the hexie flower design, she also gave me another version that is a bar with 5 hexies.

I shared the necklace photo on Instagram and it got a lot of love. You can purchase the pendants directly from Jennifer in her Etsy shop Beadeux. Here’s a quick tutorial on how to attach the fabric and assemble the pieces of the necklace.

How To Assemble a Laser Cut Hexie Necklace from Hugs are Fun

Please note: This post contains affiliate links as indicated by an asterisk.*

Supplies:
Mod Podge Glue* (I realized after the fact that I used gloss, for future ones I think I’m going to stick with matte so it’s not so shiny)
Paintbrush
Fabric scraps
X-ACTO Knife*
E6000 Craft Adhesive* or other super glue that is suitable for attaching wood. I’ve used both E6000 and Gorilla Glue and both seem to be equally secure.
A laser cut hexagon pendant kit from Beadeux

How To Assemble a Laser Cut Hexie Necklace from Hugs are Fun

Start by applying a thin layer of Mod Podge to the hexagon with a paintbrush.

How To Assemble a Laser Cut Hexie Necklace from Hugs are Fun

Press the glue down on the wrong side of the fabric and smooth it down with your finger if necessary.

How To Assemble a Laser Cut Hexie Necklace from Hugs are Fun

Turn the hexagon over and apply 2-3 thin, even coats of Mod Podge over the top of the fabric with the paintbrush. Allow each coat to dry before applying the next one. Now in a perfect world, once you’ve applied all the layers of glue you would let the Mod Podge cure on the fabric for 24 hours. However, if you’re anything like me, you will not be patient enough for that. For all of these I cut them as soon as the glue was dry and they all are fine.

How To Assemble a Laser Cut Hexie Necklace from Hugs are Fun

Place the fabric face down on a cutting surface and carefully trim around the edges with an X-ACTO knife. Get as close as possible to the edge of the hexagon.

How To Assemble a Laser Cut Hexie Necklace from Hugs are Fun

Apply a thin layer of the E6000 or whatever glue you are using to the frame of the necklace. Follow the directions on the bottle for instructions on how to adhere it. Carefully line up the holes on the frame and the backing piece and attach the two together.

How To Assemble a Laser Cut Hexie Necklace from Hugs are Fun

Apply glue to each individual hexagon and place them in each of the slots, working from left to right.

How To Assemble a Laser Cut Hexie Necklace from Hugs are Fun

For the hexie flower pendant it is the same, but make sure that when you attach the hexagons you do not start in the middle. Choose on of the slots on the sides and attach them from the outside working in.

How To Assemble a Laser Cut Hexie Necklace from Hugs are Fun

And there you have it! Add a jump ring and a chain and you’re set to show off your quilty love. This is such a perfect project for using up the tiny scraps of your most precious fabric.

You can purchase your own laser cut flower hexie pendant here and the hexie bar pendant here.

Leave a Reply